Free Shipping on most orders over $75, Click for Details!

Esenciales para la granja y la clínica

102 products


  • Aceite de silicona IVS 1.7 oz

    Aceite de silicona IVS 1.7 oz

    El lubricante de grado alimentario de IVS es perfecto para mantener sus jeringas en buen estado. Una mezcla especial de fluidos base y aditivos muy específicos hacen de este lubricante el mejor producto para el mantenimiento de las jeringas.Después de limpiar su jeringa, coloque dos o tres gotas en la junta tórica del pistón para lubricar.Contenido: 1.7 oz.Este lubricante antidesgaste está registrado por la Fundación Nacional de la Ciencia (Clase H1) para su uso cuando existe la posibilidad de contacto incidental con los alimentos. Cumple con las directrices de 1998 del Servicio de Inspección y Seguridad Alimentaria del Departamento de Agricultura de EE.UU. para su uso como lubricante con contacto incidental con alimentos. Este lubricante sólo contiene sustancias permitidas bajo US 21 CFR 178.3570, 178.3620 y 182 para su uso en lubricantes con contacto incidental con alimentos.

    $5.00

  • Termómetro de leche con estuche rígido

    Termómetro de leche con estuche rígido

    Controle la temperatura de la leche con este práctico termómetro de leche en una jaula de plástico. Rango de temperatura de -10 a 120 grados. Carcasa de plástico sólido con un práctico gancho para colgar. Líquido sin mercurio. Mide 1,25 pulg. x 1,25 pulg. x 8,25 pulg.

    $6.50

  • Alambre de sierra obstétrica, 12m (39')

    Alambre de sierra obstétrica, 12m (39')

    El alambre de Sierra OB corta rápidamente huesos o cuernos. 12 m (39 pies)

    $8.99

  • Sale -8% Muesqueador de orejas forma redonda

    Muesqueador de orejas forma redonda

    Proporciona un corte rápido y limpio de las marcas de las orejas para la identificación de los animales Corte con forma redonda Construcción de acero inoxidable de alta calidad Empacado en Blister para exposición en comercios‍

    $18.00 $16.50

  • Cortadora de pezón

    Cortadora de pezón

    Doble hoja, 3 anillos. Equipada con tornillo de fijación y muelle. Construcción de acero inoxidable. Varilla de 4-1/2″ L, 8″ de longitud total.

    $9.50

  • Cattle Prod Fiberglass Replacement Shaft 60"

    Cattle Prod Fiberglass Replacement Shaft 60"

    Fits on any Hot-Shot Electric Livestock Prod. Made of rigid fiberglass. Designed for use on livestock only. 24" = length includes the prod handle (not included, sold separately); actual length of the shaft is 15.75"36" = length includes the prod handle (not included, sold separately); actual length of the shaft is 27.75"48" = length includes the prod handle (not included, sold separately); actual length of the shaft is 39.75"60" = length includes the prod handle (not included, sold separately); actual length is 51.75"72" = length includes the prod handle (not included, sold separately); actual length of the shaft is 63.75"

    $25.50

  • Little Giant® Digital Still Air Incubator

    Little Giant® Digital Still Air Incubator

    Out of stock

    Perfect for poultry hobbyists, urban farmers or classrooms, the Little Giant Digital Still Air Incubator is made of durable, warmth-retaining Styrofoam. This incubator has a digital control board for easy temperature setting, self-regulating control. Features/Advantages: Digital control board for easy temperature setting, self-regulating controlBuilt-in digital hygrometer measures humidityAccessible water channels reduce humidity loss to improve you hatchLCD display with LED light shows accurate readings instantlyTwo 4" x 8" viewing windowsHeater Approximate Capacities: 46 chicken eggs, or118 quail eggs, or90 pheasant eggs, or40 turkey eggs How an Incubator Works: An incubator warms the air around eggs being hatched to a desired temperature. If the temperature in the area around the incubator is constant and free of drafts, an incubator will need very few adjustments once set. Do NOT use an incubator in a drafty environment. Humidity levels will vary depending on the season and region where the incubator is used. The incubator should be monitored regularly while in use. Refer to your local library; consult a local college or university agriculture department or the internet for hatching guidelines specific to the type of eggs you plan to incubate. Important – Do Not Move Egg Rails By Hand. The egg turner rails (sold separately) move very slowly. It takes 4 hours to complete a 30° side-to-side cycle. This movement may not be detected by the naked eye. Humidity Control & Ventilation: The incubator is equipped with a relative humidity sensor intended to provide the user with a humidity reading. This reading is most accurate with 60% to 80% humidity and not accurate if the incubator dries out.Water will help keep eggs naturally moist. This incubator has 6 water channels in the base you can fill as needed for the species you are hatching and your specific environment. These Perfect for poultry hobbyists, urban farmers or classrooms, the Little Giant Digital Still Air Incubator is made of durable, warmth-retaining Styrofoam. This incubator has a digital control board for easy temperature setting, self-regulating control. Features/Advantages: Digital control board for easy temperature setting, self-regulating control Built-in digital hygrometer measures humidity Accessible water channels reduce humidity loss to improve you hatch LCD display with LED light shows accurate readings instantly Two 4" x 8" viewing windows Heater Approximate Capacities: 46 chicken eggs, or 118 quail eggs, or 90 pheasant eggs, or 40 turkey eggs How an Incubator Works: An incubator warms the air around eggs being hatched to a desired temperature. If the temperature in the area around the incubator is constant and free of drafts, an incubator will need very few adjustments once set. Do NOT use an incubator in a drafty environment. Humidity levels will vary depending on the season and region where the incubator is used. The incubator should be monitored regularly while in use. Refer to your local library; consult a local college or university agriculture department or the internet for hatching guidelines specific to the type of eggs you plan to incubate. Important – Do Not Move Egg Rails By Hand. The egg turner rails (sold separately) move very slowly. It takes 4 hours to complete a 30° side-to-side cycle. This movement may not be detected by the naked eye. Humidity Control & Ventilation: The incubator is equipped with a relative humidity sensor intended to provide the user with a humidity reading. This reading is most accurate with 60% to 80% humidity and not accurate if the incubator dries out. Water will help keep eggs naturally moist. This incubator has 6 water channels in the base you can fill as needed for the species you are hatching and your specific environment. These water channels are marked with numbers 1-6 on one side; water can be added on the numbered side without removing the eggs, screen or turner. Use a turkey baster to add water. Lift the lid and slide it far enough to allow a baster to fit between the lid and base. Use numbers on the side of the incubator to identify each of the 6 water channel locations. Please refer to your local library, local college or university agricultural department or the internet for additional hatching information regarding humidity levels. In addition to observing humidity percentage, also be sure to look out for the formation of condensation within the housing. If that occurs, you may need to adjust humidity levels Good air ventilation is important in the hatching process. Air exchange is needed during embryo development. Start the hatch with the red vent plug near the heater removed. Air circulation should be increased by removing the second red plastic vent plug near the controller just before the chicks start to hatch. Both red plastic vent plugs are located on the incubator lid. If your incubator has an air circulating fan, evaporation may occur at a more rapid rate. If so, you will need to add water more frequently. water channels are marked with numbers 1-6 on one side; water can be added on the numbered side without removing the eggs, screen or turner.Use a turkey baster to add water. Lift the lid and slide it far enough to allow a baster to fit between the lid and base. Use numbers on the side of the incubator to identify each of the 6 water channel locations.Please refer to your local library, local college or university agricultural department or the internet for additional hatching information regarding humidity levels. In addition to observing humidity percentage, also be sure to look out for the formation of condensation within the housing. If that occurs, you may need to adjust humidity levelsGood air ventilation is important in the hatching process. Air exchange is needed during embryo development. Start the hatch with the red vent plug near the heater removed. Air circulation should be increased by removing the second red plastic vent plug near the controller just before the chicks start to hatch. Both red plastic vent plugs are located on the incubator lid.If your incubator has an air circulating fan, evaporation may occur at a more rapid rate. If so, you will need to add water more frequently.

    Out of stock

    $58.50

  • Mastitis Detection Cup

    Mastitis Detection Cup

    This ultimate strip cup has a 50% wider diameter (6 1/4") and a larger capacity with a practical black anti-splash screen for detecting mastitis infected milk. Snap-in screen can be removed with a simple flick of the thumb eliminating contact with potentially inflected milk. Emptying and cleaning is simple and quick. Wt. 7 oz.

    $12.90

  • Cuchara galvanizada de 6 cuartos

    Cuchara galvanizada de 6 cuartos

    Heavy-gauge galvanized steel scoop with riveted handle. Perfect for scooping grain, but heavy-duty enough for pelleted hay and feeds. Flat end for easy storage. This is the scoop you want if you are looking for long wear and years of service. 7 inch long by 7.25 inch wide by 12.5 inch high, 6-quart capacity. Heavy-gauge galvanized steel Riveted handle Long wearing for years of service Flat end for easy storage 6-quart capacity

    $17.50

  • Bebedero de acero inoxidable1/2˝ 

    Bebedero de acero inoxidable1/2˝ 

    Stainless steel nipple drinkers offer a multitude of benefits for swine management. They are highly durable and resistant to corrosion, which means they can last a long time without the need for frequent replacements. This material is also easy to clean and resistant to staining and discoloration, ensuring that the water supply remains uncontaminated. Additionally, stainless steel is heat resistant, making it suitable for high-temperature applications. The design of these drinkers keeps the water clean and free of dirt and debris, which is crucial for the health of the livestock. They have been shown to decrease or prevent the spread of diseases such as Trichomonosis, Mycoplasma synoviae, and Coccidiosis, which are common in poultry. Moreover, when installed properly, horizontal nipples will not freeze in winter, providing a consistent water supply even in cold climates. The efficiency of these systems reduces water waste, as the nipple dispenses a small amount of water each time it is pecked, with no dripping from the valve or leakage from the container. Overall, stainless steel nipple drinkers are a cost-effective, hygienic, and reliable watering solution that promotes the well-being of poultry and contributes to a more efficient farming operation. Our IVS Model 04- 3511 nipple features adjustable flow rate with three position orifice. Suitable for high and low pressure. 100% Stainless Steel for superior quality and durability. For piglets up to 80 lbs. ‍

    $6.50

  • Termómetro digital veterinario - Fahrenheit o Celsius

    Termómetro digital veterinario - Fahrenheit o Celsius

    Pantalla digital de temperatura clara y fácil de leer. Fahrenheit (°F) o Celsius (°C). Tiene un apagado automático-Incluye 1,5V. Batería e instrucciones.

  • Sale -19% Botas desechables con parte superior elástica - 6.5 MIL (paquete de 50)

    Botas desechables con parte superior elástica - 6.5 MIL (paquete de 50)

    Disposable Boots with Elastic Top, with a thickness of 6.5 MIL, offer a durable and practical solution for various environments where cleanliness and sanitation are of utmost importance. These boots are designed to be easily slipped on or off, which is essential for fast-paced work settings. The elastic top ensures that the boots stay securely in place, preventing them from falling off during use. They are very resistant, helping to keep out debris and maintain a sterile environment. Typically used in veterinary practices, laboratories, or any setting that requires strict hygiene control, these boots come in a pack of 50, providing a cost-effective option for maintaining high standards of cleanliness. Heavy Duty 6.5 mil Clear Polyethylene Plastic Boot. Easy to slip on or off. Elastic top keeps boots from falling off. Very resistant. Helps keep out debris. 50 boot covers per box. ‍

    $32.00 $25.90

Login

¿Ha olvidado su contraseña?

Don't have an account yet?
Create account